FPK-28

$35.00
Preamp Fuse Protection Kit
The Trek II ® FPK-28 kit has 4 fuses of the same rating as the ones originally installed by the Hammond factory...

ELB-1A

$109.00
Effects Loop
Adds an INSTRUMENT LEVEL effects loop to allow the use of guitar pedal type effects devices on either the upper or lower manual of many Hammond organ models.

ELB-3A

$79.00
Effects Loop Option for SSP-3A
This option provides a separate enclosure with LINE LEVEL effects send and return jacks for adding the effects device of your choice to the SSP-3A.

TP-2B

$254.00
Percussion Unit
Adds the famous B-3 type percussion sound to pre-B-3 consoles.

RV-1D

$340.00
Reverberation Unit
For use in most standard Hammond consoles. Uses a full size three spring Accutronics delay line for a natural reverb sound.

LIA-1

$36.00
Idler Assembly
The LIA-1 is an improved version of the original #522-050708 idler spring assembly. A slightly oversized wheel helps provide longer operating life.

LCO-1A

$66.00
Crossover
Allows older two channel Leslie speakers like the 710 and 720 to function as single channel cabinets making them much easier to utilize with a wide variety of instruments.

LBG-10

$9.00
Bearing Grommet
The LBG-10 is a reproduction of the original #543-051037 grommet used in the lower rotor bearings as well as in the idler spring assembly of many Leslie models.

UC-1A

$467.00
Combo Pre-Amp
Allows most single channel Leslie speakers to be driven by your portable organ, guitar, synthesizer or mixer.

FS-100 and FS-300

$74 - $143
Repleacement Front Strips
For later standard Hammond consoles such as the A-100 series, B-3 and C-3. Durable black finish with fine texture.

KBF-1

$8.00
Upstop Felt
The KBF-1 is an exact reproduction of the #042-022369 B-3 type upstop felt. An essential part of any Hammond console restoration or busbar lube job.

KBF-2

$13.50
Downstop Felt
The KBF-2 is an exact reproduction of the #042-001701 B-3 type downstop felt. An essential part of any Hammond console restoration or busbar lube job.

VIB-3

$87.50
Rotary Cabinet Simulator Interface
The VIB-3 makes it easy to connect your Neo Ventilator rotary cabinet simulator to any Hammond console with an existing Leslie 122.

OBL-2

$75.50
Line Output Box
The OBL-2 allows standard Hammond consoles to be connected via a 1/4" output jack to an external amplification system.

TBS-1 and TBS-2

$28.00
Replacement Thumb Screws
Reproductions of the thumb screws used to secure the back panels of later standard Hammond consoles.

TS-2

$88.00
Tremolo Switch
Mounts in place of the lower left hand end block on standard Hammond consoles. Allows convenient rocker switch control of the tremolo function.

ETS-2

$127.00
Echo / Tremolo Switch
Provides all the features of the TS-2 with the addition of a three position ECHO / ENSEMBLE / MAIN switch compatible with 4H echo kit tone cabinet switching.

External Footswitch

$75.00
For Slow / Fast and Run / Stop switching
8 different switching modes (incl.122 style, 760 style, latched and momentary, Slow / Fast only)

11-Pin Ventilator Cable

$75.00
Connect Ventilator to Keyboard like VK-7/8 or XK-3 and use kybd switches to control

Halfmoon Ventilator Switch

$125.00
3-way
Add the authentic looking Halfmoon switch to control your ventilator.